Inviato: ven nov 25, 2011 1:04 pm
Operation and Programming webasto
Webasto Manual Peugeot 406
The clock selector 24 - Webasto
Introductory Programming heater:
Warm start time can be precisely set from 1minuty to 23godz 59 min.
Duration of the inclusion of the pre-selection or immediate or heating may be 59 or 29 min.
With the right kind of connection when you start an immediate heat button it is possible to work permanent.
Appropriate type of electrical connection is marked with a cross through the installation workshop.
duration of 59 min incorporation
duration of the inclusion of 29 min
work has on the ignition (clamp 15)
work was in the position of ignition radio / garage (clamp 75)
work has a lasting connection with the plus (clamp 30)
Setting the Clock Selector
Insertion time clock
Run time of the day (tagesziet) and at the same time forward (Vorlauf> or backward Rà¼cklauf).
Tip:
The longer the faster przebiek pressing digits on the clock.
Polling time clock
Press the time of day (Tageszeit).
Heating on / off
Press the heat immediately (Sofortheizen)
Inclusion indicator light is lit.
Heating off:
Restart the immediate heat button
Programming the beginning of heating:
Run the "1". Time preselection Vorwahlzeit
Run forward button (Vorlauf) or backward (Rà¼cklauf) until the field appears displaying the required time.
The number 1 is displayed.
Standby indicator lights up.
The "2" allows you to set a second time preselection.
Run the "2" pre-selection time? (Vorwahlzeit)
Activating the first time pre-selection is cleared.
Activation of the second pre-selection time is displayed on the indicator number 2
Setting the second time as the pre-selection takes place for the first time.
Time control preselection:
Briefly press the "1" preselection time (vorwahlzeit) 1 or 2 times pre-selection "2".
At the rate displayed is the time pre-selection and number designation.
Deleting prefetch time.
Briefly press the "1" until the pre-selection or "2" pre-selection time
The figure marks fade and ready indicator on the display.
You can also ask for additional installation in good company "WEBASTO"
Perform such services.
http://www.webasto.it/azienda/it/html/9230.html
In Poland there are companies that offer sales and installation of Webasto heating for each car
http://www.ebac.pl/
http://allegro.pl/webasto-ogrzewanie-wo ... 01683.html
Webasto Manual Peugeot 406
The clock selector 24 - Webasto
Introductory Programming heater:
Warm start time can be precisely set from 1minuty to 23godz 59 min.
Duration of the inclusion of the pre-selection or immediate or heating may be 59 or 29 min.
With the right kind of connection when you start an immediate heat button it is possible to work permanent.
Appropriate type of electrical connection is marked with a cross through the installation workshop.
duration of 59 min incorporation
duration of the inclusion of 29 min
work has on the ignition (clamp 15)
work was in the position of ignition radio / garage (clamp 75)
work has a lasting connection with the plus (clamp 30)
Setting the Clock Selector
Insertion time clock
Run time of the day (tagesziet) and at the same time forward (Vorlauf> or backward Rà¼cklauf).
Tip:
The longer the faster przebiek pressing digits on the clock.
Polling time clock
Press the time of day (Tageszeit).
Heating on / off
Press the heat immediately (Sofortheizen)
Inclusion indicator light is lit.
Heating off:
Restart the immediate heat button
Programming the beginning of heating:
Run the "1". Time preselection Vorwahlzeit
Run forward button (Vorlauf) or backward (Rà¼cklauf) until the field appears displaying the required time.
The number 1 is displayed.
Standby indicator lights up.
The "2" allows you to set a second time preselection.
Run the "2" pre-selection time? (Vorwahlzeit)
Activating the first time pre-selection is cleared.
Activation of the second pre-selection time is displayed on the indicator number 2
Setting the second time as the pre-selection takes place for the first time.
Time control preselection:
Briefly press the "1" preselection time (vorwahlzeit) 1 or 2 times pre-selection "2".
At the rate displayed is the time pre-selection and number designation.
Deleting prefetch time.
Briefly press the "1" until the pre-selection or "2" pre-selection time
The figure marks fade and ready indicator on the display.
You can also ask for additional installation in good company "WEBASTO"
Perform such services.
http://www.webasto.it/azienda/it/html/9230.html
In Poland there are companies that offer sales and installation of Webasto heating for each car
http://www.ebac.pl/
http://allegro.pl/webasto-ogrzewanie-wo ... 01683.html
If it happens that you find it somewhere could you let me know? Thanks a lot! 
